Wi-Fi Router

1. LED — Displays the status of the router.

2. LED Off — No power.

3. LED Solid Red — Power on, no internet connection.

4. LED Solid Orange/Yellow — Factory reset in progress / firmware upgrade in progress / initial start-up.

5. LED Solid Blue — Firmware protection mode / fatal software or hardware error.

6. LED — Displays the status of the broadband connection to the router.

7. LED Off — No sync with exchange, no DSL connection detected.

8. LED Flashing Green — No sync with exchange, DSL connection detected, attempting to gain sync.

9. LED Solid Green — In sync with exchange.

10. LED — Displays the status of the Internet connection to the router.

11. LED Off — No PPP, not attempting to gain PPP.

12. LED Flashing Red — Sync detected, attempting to gain PPP (attempting to authenticate).

13. LED Solid Red — Connected, authentication has been denied (suspended, incorrect username/password).

14. LED Solid Green — Connected, authenticated successfully.

15. LED Flashing Green — Connected, authenticated successfully, data transferring to internet.

16. Phone LED — Displays the status of the phone line in to the router.

17. LED Off — Telephony is turned off.

18. LED Solid Green — Telephony is enabled.

19. Wi-Fi/ Wireless LED — Display the status of the wireless network.

20. Wi-Fi/ Wireless LED Off — Wi-Fi switched off.

21. Wi-Fi/ Wireless LED Solid green — Wi-Fi is switched on.

22. WPS LED Orange — When WPS button is pressed. Orange indicates searching for connections via WPS.

23. WPS LED Flashing Green — Flashing green indicates successful connection via WPS.

24. WPS LED Flashing Red — Flashing red indicates an unsuccessful connection via WPS.

After an unsuccessful connection the LED will flash run and then turn off.